Forum: Reloading

Looks like reloading supplies just got a bit harder to get. http://www.johnsoncitypress.com/News/article.php?ID=80632

Greetings... I'm going to try out a 300gr flat nose for 45 Long Colt... I cast it with the 6 cavity Lee mold C452-300-RF... BHN 20.9 (yeah, kinda...

Greetings... So... After 12 or 13 years I'm sick of dry media... I picked up 500 50BMG cases for a good price but they were covered inside and out...

Okay, so you reload.. You got gunpowder, primers, and live ammo lying around.. How do you securely store them? In the closet with your reloading...

the problem is i have some once shot hornady brass. i knew they were short but didn't think it would be a problem since i was planning to load the...

Wal mart just got in a pile of CCI No.500 Small pistol primers $3 per 100. Just thought I'd gloat a bit.:D

Where can this be found near BR? Where is this stuff hiding? Somebody hook me up with the location!!:D Someone has to have this stuff in stock..

Hurry up and get you some. I just ordered a keg and some primers. Sorry, didn't want to wait till they were out to find out if anyone else wanted...

So I plan on loading 77 grain SMK in .223 and 168 grain SMK in .308. I was thinking about using one powder(Varget) for both loads but wanted...

If you happen to loose one. There you go. It's a standard size. 0.17 cents at the local hardware store. Dillon will send you replacement ones....

Stopped in today and picked up a few things. They seem to have a good selection of all size primers and a pretty good variety of powders.

Anyone got a couple hundred youre willing to come off of? I can find the Wolf, but hate to pay hazmat for 1000 and I really only need a hundred or a...

Just back from Bass Pro and they have Varget (4x1lb) in stock as well as 1000 CCI 400 SR primers. They also are stocked on Remington 7 1/2 SR BR, 9...

I recently purchased the Hornady Lock n Load conversion kit. I am using it on a RCBS Rockchucker Supreme, but it will work on any press with the same...

I finally got off my ass and loaded the 700 grain Ranger Rick Tyrannosaurus Stoppers I'd picked up a couple months back. I set them over 27.5 grains...

can someone explain what this is to me? ive read about havin to swage it out but what does it look like. i got some 5.56 and it seems that most of it...

For those that don't know Lafayette Shooters has a new reloading department but it's a bit pricey. I have an order with a mailorder house For...

i loaded up some 9mm and 45acp and decided to shoot some of them yesterday. the brass shows alot of burnt stuff on the outside of the case on one...

Header says it all. Fairly good stock of powder at Bass Pro. Still no primers. Each pound was a few dollars higher than Cabelas, but if it saves a...

so i finally decided it was time to actually put some stuff together. i loaded 100 rds 9mm 125gr rn on top of 4.1gr bullseye with rem smp primers. i...

anyone use them? ok stuff? their supposed to be about the same as rainers. they are $80/1k and i can have them in my hand today.

Does anyone have a few hundred 308 brass I can buy? Hammar, did you check on yours? I would prefer commercial since i cant remove primer crimps...

Just back from Cabelas. They have Varget in stock. I bought 2 and saw 3 or 4 more on the shelf. $24.99 per pound. There was a large variety...

for those that are more experienced can you explain to me the primer deal. i understand that if a load calls for say large pistol magnum primers and...

Been doing some research on primers since I keep missing out on 210M's everytime I get the email from Midway, by the time I get online, theyre out...

I need some .45 Colt brass. Anyone here have some for sale?

Interview with Chris Hodgdon at SHOT, posted by AccurateShooter.com. In it, Cris mentions that if you like Varget, you may like this better. ...

Looking for a good load for .308 using Varget powder and 168 Sierra Match Kings. Anybody?

so what are yall loading for 223 in the 55g variety. i will mainly be using it for killing coke cans and other random shit laying around.

Ok so my buddy brought over his Hornady OAL gauge and after checking my .308 it appears that with the 168gr Sierra's the OAL is 2.890. I have been...

I saw two bricks of Remington 7 1/2 Small Rifle primers on the shelf today. I think they are $35 each, but i have not seen those there in a LOOOONG...

http://www.alliantpowder.com/whats_new/latest_products.aspx

R22, Winchester 231 or Bullseye

ive been thinking about reloading for awhile but haven't done it because i don't shoot enough for it to really save me any money but ive came to the...

I would like to order some primers from Wideners.com. http://www.wideners.com/itemview.cfm?dir=278|284|737 If you want to get some as well,...

Just got a notification that it is in stock at Natchez Shooters Supply $20 per pound $136 for 8 pounds ...

I just picked up an RCBS Rock Chucker Master kit. (On sale at Cabela's for $289 and they gave me $30 off at the register) I know I want to use the...

Louisiana Gun and Reloading just got a shipment of Varget powder and has it in stock right now. Don't know the price, but i know they had to pay...

I am about to start reloading rifle ammunition. I keep hearing several people talk about jumping the bullet and setting distance from the lands. I am...

I just stopped at Cabela's to see what they had. Surprisingly, they have an assortment of CCI primers. SR, SP, LP Not a lot though. Decent...

I am getting ready to order some supplies. Looking for advice. My plan is to order some bullets like these for M1 Garand Loading ...

I am thinking of putting together a drop shipment from Sierra. I need some 77, 80, and 175gr SMK's. Dzelenka has mentioned before that by going...

Is anybody else having problems with the feeding of LR primers? Especially Wolf LR primers.

Well, I say my loads, I loaded them myself. Used Lyman 49th as a guide. Shot about 100 or so .223, and about 50 .40 Pretty much all I had loaded...

I have not had any problems reloading .223 until today. I used the same setup on my Dillon 650 for this loading. Same dies setup, same...

Natchez Shooters has Varget and Reloder 15 in stock. But it won't last long.

Seeing how this is the first thread in this forum, Im guessing I may not get the answers Im looking for, but Ill try. Pretty much the only reloading...

Well so far my venture into reloading rifle rounds has been good until last night. I loaded 50 rounds of .223 and while I was getting ready to...

Whos reloading with the Hornady LNL AP? Im trying to get mine lined out for 308, And this thing is giving me fits. The main problem is getting the...

I may sell a few pounds if anybody wants a small amount. The price I paid worked out to about 10 cents each. I can find out how many will fit in a...

AccurateShooter.com posted: Make Your Own Length-To-Lands Gauge

I had a little extra time on the way home, and a Cabela's gift card, so I decided to stop by. I picked up a bullet puller, and a case tumbler...

I picked up the Lyman 49th manual, and some bullets today. I was looking for some 55grn FMJ, but didnt see any. I wound up with some 55grn V-max. ...

It might be a good idea to post a good bit of PERTINENT information with your loads so others may not try to overstep a pressure threshold that might...

I just thought a thread for your pet loads/reloading data would be cool. I'll copy some of mine later.

We now have a forum for all your reloading questions, advice or tips. The only thing we ask is when giving advice, please state only facts. If you...

You read that when reloading you should measure your rifle's headspace and be within .001 to .002 of that number to have a good fit. Too little or...

I try to avoid BS for the most part. Very rarely I still go peak. Im getting a reloading press for my birthday, so I found myself over there...

I'm putting this here since it's basically reloading-related. Lots to choose from in this Graf & Sons’ summer flier: ...

I posted a few months ago about a starter kit I was considering. Im getting ready to go ahead and purchase one, or probably try and get someone to...

Before I found that Sherburne was closed today, I loaded some .308 rounds for testing and as prep for the 600 yd match in August. I have seen this...

Okay, so you've been reloading for a while and you decide it's time to upgrade from the one bullet at a time method. Without breaking the bank...

http://www.nennstiel-ruprecht.de/bullfly/